How To Repair Old Aluminum Storm Windows

How to remove Aluminum Storm Windows

Aluminum storm windows were very popular in the 1950's and 1960's. If y'all have a home built in that period, you are very probable going to have them.

When you want to fix the screens or just take the windows apart for cleaning, you are going to need to know how to take them apart.

The vast majority of aluminum storms have a single sliding panel, a fixed console and a screened console. The fixed panel can exist above the screen in a vertical single panel arrangement or the fixed console can exist to the left or right of the screen in a horizontal side slider arrangement.

Hither are the steps you lot need to follow to take them apart:

To Remove Vertical Storm Sashes

Check on the outside to meet if the storm window frames accept been painted. Y'all will demand to score the paint with a utility knife to allow the storms to come autonomously easily

Open up the inside window all the manner so you tin access the storm window

Elevator the operating sash until you lot see the bottom of the sash immigration the frame that holds it in.

Some storm windows will have leap clips at the summit of the window which will hold the moveable sash in identify as you lot elevator it all the way upwardly.

Pull the lesser of the moveable sash toward you lot just enough to clear the frame, the pull the sash down, out of the frame.

Brand sure the window behind the storm is fully open, have someone hold information technology up if it wont stay.

Lift the storm sash up and again pull the bottom toward you lot, enough to clear the inside window ledge. Remove the storm panel and put it away safely.

The remaining fixed panel unremarkably sits on top of the screen frame. Utilize you fingernails to button the stock-still panel up until it comes apart from the frame.

Pull the bottom of the stock-still sash toward you until it clears the frame. Pull down on the sash until it comes free of the frame.

Remove the fixed sash from the window in the same style you lot removed the moveable sash.

Grab the screen frame at the height and push it up.

Hold the bottom of the screen frame and push button it upwardly and out of the window frame. Dont driblet it out the window !

How to remove horizontal tempest sashes

Check on the outside to meet if the aluminum storms have been painted. You will need to score the paint with a utility pocketknife to permit the storms to come up autonomously easily

Open the within windows all the manner so you tin access the storms

Slide the operating panel to the left or right until you see the bottom side of the sash clearing the frame that holds it in.

There is normally a big gap in the lesser frame that allows the lesser of the console to clear when it is all the way over in the open position.

Some storms will have spring clips or plastic clips at the top left or top right of the window which will hold the moveable sash in identify every bit you slide it all the way across.

Pull the side of the moveable panel toward you just enough to clear the frame, so pull the panel toward the closed position, sliding it out of the frame and the clips at the summit.

Slide the storm sash across and again pull the side toward you, enough to clear the inside window ledge. Remove the storm sash and put it abroad safely.

The remaining fixed tempest sash commonly sits to the left or right of the screen frame. Use y'all fingernails to push the fixed sash sideways and the screen the opposite direction until they start to come apart and you come across a gap between them.

Pull the side of the fixed panel toward you until it clears the frame. Slide the panel until it comes complimentary of the frame.

Remove the fixed console from the window in the same manner you removed the moveable console.

Grab the screen at the side and slide it out of the frame and pull it out merely similar the removeable panel.