How To Install Jack Post In Basement
How to Install Basement Jack Posts
A jack post is an adjustable steel cavalcade that is by and large used equally a means of support for overhead beams. In the U.s. they are only to exist used as a temporary support system and must eventually be replaced past a permanent system.
- Level
- Wrench
Tip
Most jack posts have pre-drilled anchoring plates on both the superlative and the bottom for added stability. Holes can be drilled in the cement floor to ballast the post, while lags can be screwed into a support beam to attach the upper jack post plate.
Although at that place are many makes and models of jack posts, the jacking mechanism works in essentially the same manner for all of them. Placement and mounting, however, must be determined by the user and the situation in which the jack post is needed.
-
Place the jack mail in position. The base of operations must exist level and placed solidly on the basement floor. Apply a level to ensure that both the base and the sides are level and plumb.
-
Extend the upper portion of the post as far equally it volition go. On many types, a pin is removed and the upper portion is extended as close as it tin exist to the overhead beam. Replace the pin when the extension is complete.
-
Accommodate the jack by turning a key screw or bolt mechanism. Depending on the jack design, there will either be a built-in handle or a nut that must be turned past a wrench. Plough the screw mechanism until the top of the jack post firmly contacts the overhead support axle.
Source: https://homesteady.com/12002739/how-to-install-basement-jack-posts
Posted by: mcraeopoetinat.blogspot.com
0 Response to "How To Install Jack Post In Basement"
Post a Comment